Filter
Top Products
CPF180i and CPF300i Page 43
the time, moving the ShuttlePoint knob up or down selects the Tide height and Tide draught
on the Tide Graph.
4.0.3 Wrecks
This feature is used to locate Wrecks nearest the position of your vessel.
1. Press [FIND].
2. Move the ShuttlePoint knob to highlight
WRECKS and press [ENT] or move the
ShuttlePoint knob to the right.
3. A popup window will be shown with a list of nearest Wrecks.
4. Move the ShuttlePoint knob to highlight the desired Wreck and press [ENT].
5. Another window will be shown detailing the Wreck information.
6. Press [CLR] to show the actual position of the Wreck on the chart page.
7. Press [CLR] again at any time to return your cursor to your vessels position.
WAAS 3D
Figure 4.0.3 - Find Wrecks
4.0.4 Obstructions
This feature is used to locate Obstructions nearest the position of your vessel.
1. Press [FIND].
2. Move the ShuttlePoint knob to highlight
OBSTRUCTIONS and press [ENT] or move the
ShuttlePoint knob to the right.
3. A popup window will be shown with a list of nearest Obstructions.
4. Move the ShuttlePoint knob to highlight the desired Obstruction and press [ENT].
5. Another window will be shown detailing the Obstruction information.
6. Press [CLR] to show the actual position of the Obstruction on the chart page.
7. Press [CLR] again at any time to return your cursor to your vessels position.
WAAS 3D
Figure 4.0.4 - Find Obstructions