Filter
Top Products
Page 106 CPF180i and CPF300i
Figure 16.4.1a - Example of Goto PTX on CP300
If the navigation is set to the selected PTX icon, to terminate the navigation:
ON CPF180I
press [ENT], select STOP GOTO using the ShuttlePoint knob and press [ENT].
Figure 16.4.1b - Example of Stop Goto PTX on CP180
ON CPF300I
press [STOPGOTO].
Figure 16.4.1c - Example of Stop Goto PTX on CP300
16.4.2 The MOBILARM Alarm Status List
The MOBILARM Alarm Status List shows the list of all PTX that the GPS Chart Plotter has
received an alarm from. To review the page:
1. Select the Chart page.
2. Press [MENU] to show the Main menu.
3. Move the ShuttlePoint knob to highlight
USER POINTS and press [ENT].