Filter
Top Products
CLEANING PROCEDURE FOR THE GPS CHART PLOTTER SCREEN
Cleaning of the chart plotter screen is a very important operation and must be done
carefully. Since the surface is covered by a antireflective coating, the procedure for
cleaning all the surfaces can be performed using the following procedure: You need
a tissue or lens tissue and a cleaning spray (Windex) containing Isopropanol (a
normal spray cleaner sold for the PC screen, for example PolaClear by Polaroid).
Fold the tissue or lens tissue into a triangular shape, moisten the tip and use the
index finger behind a corner to move the tissue across the surface, in overlapping
side to side strokes. If the tissue is too wet, a noticeable wet film will be left in its path
and you will need to repeat the process. If too dry, the tissue won’t glide easily, and
may damage the surface.
CAUTION
- The GPS Chart Plotter is designed for maritime use. To avoid water intrusion
ensure the C-MAP B
Y JEPPESEN C-CARD door is completely closed.
- Extensive exposure to heat may result in damage to the GPS Chart Plotter.
- The GPS Chart Plotter contains dangerous high voltage circuits which only
experienced technicians can handle.
- STANDARD HORIZON will not be liable for errors contained herein, or for
incidental or consequential damages in connection with the performance or use
of this material.