Filter
Top Products
Page 42 CPF180i and CPF300i
WAAS 3D
Figure 4.0.1 - Find a Port
4.0.2 Tide Stations
This feature is used to locate Tide Stations nearest the position of your vessel. Once a Tide
Station is selected the Tide Graph can be used to determine Tide height and draught of
the Tide based on a user specified time.
1. Press [FIND].
2. Move the ShuttlePoint knob to highlight
TIDE STATIONS and press [ENT] or move the
ShuttlePoint knob to the right.
3. A popup window will be shown with a list of nearest Tide Stations.
4. Move the ShuttlePoint knob to highlight the desired Tide Station and press [ENT].
5. Another window will be shown detailing the selected Tide Station information.
6. Press [CLR] to show the actual position of the Tide Station on the chart page.
7. Press [CLR] again at any time to return your cursor to your vessels position.
WAAS 3D
Figure 4.0.2 - Tide Stations
2
1
3
Figure 4.0.2a - Tide Graph page
Refer to the image above. The time (3) displayed corresponds to the location of the cross-
hair cursor (2) in the Tide Graph (1). Moving the ShuttlePoint knob to the left or right changes