Filter
Top Products
Page 46 CPF180i and CPF300i
4b. Otherwise press [MENU] to enter the desired Lake name. A window will be shown: move
the ShuttlePoint knob to highlight the edit of Lake name and press [ENT] to accept:
another popup window will appear displaying the distance and position of the Lake.
6. Press [ENT] to show the actual position of the Lake on the chart page.
7. Press [CLR] again at any time to return your cursor to your vessels position.
WAAS 3D
Figure 4.0.6 - Find Lakes By Name
4.0.7 Points Of Interest
This feature is used to locate Points Of Interest nearest the position of your vessel.
1. Press [FIND].
2. Move the ShuttlePoint knob to highlight
POINTS OF INTEREST and press [ENT] or
move the ShuttlePoint knob to the right.
3. A (Category) popup window will be shown with a list of Category types (i.e. attractions,
emergency, entertainment).
4. Move the ShuttlePoint knob to highlight the desired Category and press [ENT].
5. A (Type) popup window will be shown with a list of types.
6. Move the ShuttlePoint knob to highlight the desired Type and press [ENT].
7. A popup window will be shown with a list of nearest Points Of Interest that fall into the
Category and Type you have selected.
8. Move the ShuttlePoint knob up/down to highlight the desired Point Of Interest and press
[ENT].
9. Another window will be shown with detailing the Point Of Interest information.
10. Press [CLR] to show the actual position of the Point Of Interest on the chart page.
11. Press [CLR] again at any time to return your cursor to your vessels position.
WAAS 3D
WAAS 3D
Figure 4.0.7 - Find Points Of Interest