Filter
Top Products
CPF180i and CPF300i Page 79
12.0.0 Window Selections
The window on the right side of the Chart page is called the General Window and it may be
edited, customized or even changed to show a highway or compass tape.
FULL CHART (None)
GENERAL
1 LINE SMALL
1 LINE LARGE
2 LINES SMALL
HIGHWAY COMPASS
WAAS
WAAS 3D
Figure 12.0.0 - Data window layout
1. To change, press [MENU]. Move the ShuttlePoint knob to highlight SETUP MENU and
press [ENT].
2. Move the ShuttlePoint knob to highlight
GENERAL SETUP and press [ENT] or move
the ShuttlePoint knob to the right.
3. Move the ShuttlePoint knob to highlight
WINDOW SETUP and press [ENT] or move the
ShuttlePoint knob to the right.
4. Move the ShuttlePoint knob to highlight
CHART PAGE and press [ENT] or move the
ShuttlePoint knob to the right.
5. Select the desired window,
HIGHWAY or COMPASS, and press [ENT] or move the
ShuttlePoint knob to the right.
6. Press [CLR] or move the ShuttlePoint knob to exit the menu and show the Chart page.
12.0.1 Customizing the Data Windows
The data fields contained on the General, 1 Line Small/Large and 2 Line Small data windows
can be changed to the following selections:
· SOG = Speed Over Ground
· COG = Course Over Ground
· DST = Distance
· BRG = Bearing
· XTE = Cross Track Error
· TTG = Time To Go
· STR = Steering
· HDG = Heading from Electronic Compass
· DTP = Depth
· SPD = Speed
· ALT = Altitude
· AWS = Apparent Wind Speed
· AWD = Apparent Wind Direction
· TWS = True Wind Speed