Filter
Top Products
Page 22 CPF180i and CPF300i
Instrument). If the autopilot connections are made to Port 3 (Yellow wire) and the autopilot
is not reading the sentences, change the connections to Port 1 (Brown) and change the
sentences to APA, APB, BOD, GGA, GLL, RMC and XTE.
2.4.1 Connection For CPF180i
2.4.1.1 DC Power Connection
Battery
10-35Vdc
Red
2A
Fuse
Black
Switch
+
-
Optional WAAS GPS
ntennaa
CPF180i
PWR & ACC 1 Cable
Transducer
2.4.1.2 Connection of the AIS receiver, VHF and Autopilot
Optional WAAS GPS
antenna
CPF180i
Battery
10-35Vdc
Red
2A
Fuse
Black
Switch
+
-
VHF
Green
Blue
NMEA Common
Port 1 Input
Yellow Port 3 Output
AIS
PWR & ACC 1 Cable
Transducer
CPF180i
Battery
10-35Vdc
Red
2A
Fuse
Black
Switch
+
-
VHF
PILOT
Green
Blue
Brown
NMEA Common
Port 1 Input
Port 1 Output
Yellow Port 3 Output
PWR & ACC 1 Cable
Transducer
Optional WAAS GPS
antenna
AIS Setup
The CPF180i has to be setup to be able to receive NMEA information from the AIS receiver.