Filter
Top Products
Page 38 CPF180i and CPF300i
above) to the following: CHART, DUAL CHART, CHART/COMPASS, CHART/HIGHWAY,
NAVIGATION, HIGHWAY, CELESTIAL, GPS STATUS, DSC LOG, DSC DIRECTORY,
NMEA DISPLAY, NMEA DATA, DEPTH TREND, WIND SPEED TREND, TEMP TREND,
SOG TREND, MARKS/WAYPOINTS, USER C-CARD, FIND , VIDEO INPUT, 50kHz FULL
PAGE, 200kHz FULL PAGE, 50kHz/CHART PAGE or 200kHz/CHART PAGE.
Also when a SI-TEX RADAR Antenna is connected (USA only), any Soft Key can be
customized to show Radar pages, RADAR FULL, RADAR/CHART, RADAR OVERLAY and
RADAR/FISH FINDER.
Figure 3.7 - Window options of the selected Soft Key on CPF300i
1. To change, momentarily press any of the Soft Keys, then press and hold the Soft Key
you want to customize.
2. A popup window will be shown with the above settings.
3. Move the ShuttlePoint knob up or down to select the desired page.
NOTE
Additional pages are shown after Radar/Fish Finder page and can be access by pressing the
ShuttlePoint knob down after Radar/Fish Finder is highlighted.
4. Press [ENT] or move the ShuttlePoint knob to the right to save the page to the selected
Soft Key.
3.8 OTHER SETTINGS IN GENERAL SETUP MENU
The GENERAL SETUP menu has other selections that allow you to customize:
TIME SETUP Selects a sub-menu to allow the time setup. It is possible to choose the Time Zone, select
the Daylight Saving among On/Off/Auto and the Time Format, switching 12 or 24 hours
time format.
DATE FORMAT Allows choosing date format MM-DD-YY or DD-MM-YY.
COURSE UP/NORTH UP Selections are:
North Up : The Top of the page is fixed to North
Course Up: The top of the page is orientated to the direction the vessel is heading.
KEYPAD BEEP Allows the beep produced when a key is pressed to be turned on or off.
UNITS OF MEASURE Units of Measure can be selected for Distance, Speed, Depth, Altitude and Temperature.
NAV AIDS PRESENTATION Allows the Nav Aids presentation to be drawn using NOAA symbology when US is
selected or International symbols will be used when International is selected. When
selected these functions affect how the icons for Lights, Signals, Buoys and beacons are
displayed.
DISPLAY COLOR Changes the background colors of the chart page to enhance the visibility of the screen