Filter
Top Products
Hardware Log Sensor Events
The hardware logs provide hardware status messages to the system management software. On particular
systems, the subsequent hardware messages are not displayed when the log is full. These messages
provide status and warning messages when the logs are full.
Table 13. Hardware Log Sensor Events
Event Message Severity Cause
Log full detected.
Critical This event is generated when the
SEL device detects that only one
entry can be added to the SEL
before it is full.
Log cleared.
Information This event is generated when the
SEL is cleared.
Drive Events
The drive event messages monitor the health of the drives in a system. These events are generated when
there is a fault in the drives indicated.
Table 14. Drive Events
Event Message Severity Cause
Drive <Drive #> asserted
fault state.
Critical This event is generated when the
specified drive in the array is
faulty.
Drive <Drive #> de-
asserted fault state.
Information This event is generated when the
specified drive recovers from a
faulty condition.
Drive <Drive #> drive
presence was asserted.
Information This event is generated when the
drive is installed.
Drive <Drive #>
predictive failure was
asserted.
Warning This event is generated when the
drive is about to fail.
Drive <Drive #>
predictive failure was
deasserted.
Information This event is generated when the
drive from earlier predictive
failure is corrected.
Drive <Drive #> hot spare
was asserted.
Warning This event is generated when the
drive is placed in a hot spare.
Drive <Drive #> hot spare
was deasserted.
Information This event is generated when the
drive is taken out of hot spare.
Drive <Drive #>
consistency check in
progress was asserted.
Warning This event is generated when the
drive is placed in consistency
check.
215