Filter
Top Products
SNMP Trap
Numbers
1151
Event ID — 2173
Description Unsupported configuration detected. The SCSI rates of the enclosure management
modules (EMMs) are not the same. EMM 0 % 1 EMM 1 % 2
Severity Warning / Non-critical
Cause and
Action
Cause: An unsupported configuration was detected.
Action: Replace one of the EMMs with the matching SCSI rate EMM.
Related Alert
Information
Clear Alert Number: None
Related Alert Number: None
Local Response Agent (LRA) Number: 2090
SNMP Trap
Numbers
853
Event ID — 2174
Description The controller battery has been removed.
Severity Warning / Non-critical
Cause and
Action
Cause: The controller cannot communicate with the battery. The battery may be
removed, or the contact point between the controller and the battery may be burnt
or corroded.
Action: Replace the battery if it has been removed. If the contact point between
the battery and the controller is burnt or corroded, you must replace either the
battery or the controller, or both. See the hardware documentation for information
on how to safely access, remove, and replace the battery.
Related Alert
Information
Clear Alert Number: None
Related Alert Number: 2188, 2318
Local Response Agent (LRA) Number: 2100
SNMP Trap
Numbers
1153
Event ID — 2175
Description The controller battery has been replaced.
Severity OK / Normal / Informational
Cause and
Action
Cause: This alert is for informational purposes.
Action: None
99