Filter
Top Products
Explanation Specifies the name of the memory bank in the system that generated the message,
for example: Memory device bank location: Bank_1
Description
Line Item
Memory device location: <Device name in chassis>
Explanation Specifies the location of the memory module in the chassis, for example: Memory
device location: DIMM_A
Description
Line Item
Number of devices required for full redundancy: <Number>
Explanation Specifies the number of power supply or cooling devices required to achieve full
redundancy, for example: Number of devices required for full
redundancy: 4
Description
Line Item
Peak value (in Watts):<Reading>
Explanation Specifies the peak value in Watts, for example: Peak value (in Watts):
1.693
Description
Line Item
Possible memory module event cause: <list of causes>
Explanation Specifies a list of possible causes for the memory module event, for example:
Possible memory module event cause:
Single bit warning error rate exceeded
Single bit error logging disabled
Description
Line Item
Power Supply type: <type of power supply>
Explanation Specifies the type of power supply, for example: Power Supply type: VRM
Description
Line Item
Previous redundancy state was: <State>
Explanation Specifies the status of the previous redundancy message, for example: Previous
redundancy state was: Lost
Description
Line Item
Previous state was:<State>
Explanation Specifies the previous state of the sensor, for example: Previous state was:
OK (Normal)
Description
Line Item
Processor sensor status: <status>
Explanation Specifies the status of the processor sensor, for example: Processor sensor
status: Configuration error
25