Filter
Top Products
Table 3. Alert Message Format
Alert ID Message Text Displayed in the Storage
Management Service Documentation
Message Text Displayed in the Alert Log
with Variable Information Supplied
2127 Background Initialization started Background Initialization started: Virtual Disk
3 (Virtual Disk 3) Controller 1 (PERC 5/E
Adapter)
2334 Controller event log % Controller event log: Current capacity of the
battery is above threshold : Controller 1
(PERC 5/E Adapter)
The variables required to complete the message vary depending on the type of storage object and
whether the storage object is in a SCSI or SAS configuration. The following table identifies the possible
variables used to identify each storage object.
NOTE: Some alert messages relating to an enclosure or an enclosure component, such as a fan or
EMM, are generated by the controller when the enclosure or enclosure component ID cannot be
determined.
NOTE: A, B, C and X, Y, Z in the following examples are variables representing the storage object
name or number.
Table 4. Message Format with Variables for Each Storage Object
Storage Object Message Variables
Controller
Message Format: Controller A (Name)
Message Format: Controller A
For example, 2326 A foreign configuration has been detected: Controller 1
(PERC 5/E Adapter)
NOTE: The controller name is not always displayed.
Battery
Message Format: Battery X Controller A
For example, 2174 The controller battery has been removed: Battery 0
Controller 1
SCSI Physical Disk
Message Format: Physical Disk X:Y Controller A, Connector B
For example, 2049 Physical disk removed: Physical Disk 0:14 Controller 1,
Connector 0
SAS Physical Disk
Message Format: Physical Disk X:Y:Z Controller A, Connector B
For example, 2049 Physical disk removed: Physical Disk 0:0:14 Controller 1,
Connector 0
Virtual Disk
Message Format: Virtual Disk X (Name) Controller A (Name)
Message Format: Virtual Disk X Controller A
For example, 2057 Virtual disk degraded: Virtual Disk 11 (Virtual Disk 11)
Controller 1 (PERC 5/E Adapter)
NOTE: The virtual disk and controller names are not always displayed.
Enclosure
Message Format: Enclosure X:Y Controller A, Connector B
For example, 2112 Enclosure shutdown: Enclosure 0:2 Controller 1,
Connector 0
SCSI Power Supply
Message Format: Power Supply X Controller A, Connector B, Target ID C
56