Filter
Top Products
Event Message Severity Cause
An OEM diagnostic event
occurred.
Information This event is generated when an
OEM event occurs. OEM events
can be used by the service team
to better understand the cause of
the failure.
CPU <number> protocol
error detected.
Critical This event is generated when the
processor protocol enters a non-
recoverable state.
CPU bus parity error
detected.
Critical This event is generated when the
processor bus PERR enters a
non-recoverable state.
CPU <number>
initialization error
detected.
Critical This event is generated when the
processor initialization enters a
non-recoverable state.
CPU <number> machine
check error detected.
Critical This event is generated when the
processor machine check enters
a non-recoverable state.
All event logging is
disabled.
Critical This event is generated when all
event logging is disabled.
Logging is disabled.
Critical This event is generated when the
ECC single bit error rate is
exceeded.
The system board fail-
safe voltage is outside
of range.
Critical This event is generated when the
system board voltages are not at
normal levels.
The system board fail-
safe voltage is within
range.
Information This event is generated when
earlier Fail-Safe system voltages
return to a normal level.
A hardware
incompatibility detected
between BMC/iDRAC
firmware and CPU.
Critical This event is generated when
there is a mismatch between the
BMC and iDRAC firmware and
the processor in use or vice
versa.
A hardware
incompatibility was
corrected between BMC/
iDRAC firmware and CPU.
Information This event is generated when an
earlier mismatch between the
BMC and iDRAC firmware and
the processor is corrected.
Device option ROM on
embedded NIC failed to
support Link Tuning or
FlexAddress.
Critical This event is generated when the
PCI device option ROM for a NIC
does not support link tuning or
the Flex addressing feature.
223