Filter
Top Products
Severity Error
Cause An SD card device sensor in the specified system detected an error. The sensor
location, chassis location, previous state, and SD card device type information is
provided. The SD card state is provided if an SD card is present in the SD card
device.
Event ID — 1755
Description
SD card device sensor detected a non-recoverable value Sensor
location: <Location in chassis>
Chassis Location: <Name of chassis>
Previous state was: <State>
SD card device type: <Type of SD card device>
SD card state: <State of SD card>
Severity Error
Cause An SD card device sensor in the specified system detected an error from which it
cannot recover. The sensor location, chassis location, previous state, and SD card
device type information is provided. The SD card state is provided if an SD card is
present in the SD card device.
Chassis Management Controller Messages
The Alerts sent by M1000e Chassis Management Controller (CMC) are organized by severity. That is, the
event ID of the CMC trap indicates the severity (informational, warning, critical, or non-recoverable) of
the alert. Each CMC alert includes the originating system name, location, and event message text. The
alert message text matches the corresponding Chassis Event Log message text that is logged by the
sending CMC for that event.
Event ID — 2000
Description CMC generated a test trap.
Severity Informational
Cause A user-initiated test trap was issued, through the CMC GUI or RACADM CLI.
Event ID — 2002
Description CMC reported a return-to-normal or informational event.
Severity Informational
Cause CMC informational event, as described in the drsCAMessage variable binding
supplied with the alert.
53