Filter
Top Products
viii
SYSTEM CONFIGURATION
Control Unit
FAP-7011C
Control Unit
FAP-7001
Contact Signal IN
Contact Signal OUT
PC (for serviceman)
Heading Sensor
PG-700
External Buzzer
Event Switch
NAV Equipment
(NMEA 0183)
CAN bus Equipment
(NMEA 2000)
IPS Interface Unit
IF-700IPS
Volvo IPS Gateway
Autopilot Gateway
EVC System*
4
12-24 VDC
Solenoid
Valve
Hydraulic Linear Drive
Rudder Reference Unit
FAP-6112*
2
Ship's
Steering
System*
3
Remote Controller
Distributor FAP-6800
Remote Controller
Remote Controller
Remote Controller
*
1
: Attach the terminator (type: BD-07AFFM-LR7001) to the port not used on the last control unit
in the series.
*
2
: Not required for Fantum Feedback
TM
([Rudder Sensor] = [Fantum Feedback]).
*
3
: Not required for a IPS drive equipped vessel.
*
4
: For the EVC system available with the NAVpilot, contact your dealer.
Remote Controller:
Dial Type: FAP-5551, FAP-5552
Button Type: FAP-6211, FAP-6212
Lever Type: FAP-6221, FAP-6222
Dodge Type: FAP-6231, FAP-6232
Control Unit Qty: Max. 6*
1
The processor unit has two connection
lines for the control unit.
Three control units can be connected
per each connection line.
: Standard
: Option
: User Supply
Processor Unit
FAP-7002