Filter
Top Products
2. STEERING MODES
2-24
2.9.2 Button-type remote controller (FAP-6211, FAP-6212),
Lever-type remote controller (FAP-6221, FAP-6222)
The button-type and lever-type controller has an ON/OFF switch and works like an
NFU remote controller. When the remote controller is turned on, the user operates the
remote controller to move the rudder and the rudder stops once operation of the re-
move controller is stopped.
To use this function, set the remote mode of the remote controllers to [NFU] on the
[RC Setup] menu (see section 7.17). For the button-type remote controller, you can
use as the dodge-type remote controller when the remote mode is set to [Dodge].
1. Turn on the remote controller to show " " on the control unit.
2. For button-type remote controllers, press the W or X key on the remote controller.
For the lever-type, position the lever for the direction.
ON
䋺
Pull the lever.
Button-type
Lever-type
ON
䋺
Switch to ON
Turn to PORT
Button-type
Lever-type
Turn to STBD
Turn to PORT Turn to STBD