Filter
Top Products
7. INITIAL SETTINGS
7-14
If the steering speed needs to be adjusted the following message appears. To ad-
just the steering speed, push the Course control knob then retry the rudder test.
If adjustment is not required, press the key.
11. Push any key to show the rudder test result.
• [Drive Unit:]: Drive type used with the NAVpilot: [Reversible 12V (or 24V)] or
[Safe-Helm 12V (or 24V)]
• [Rudder Speed]: Rudder speed ([OK], [Fast], or [Slow])
• [Rudder Drive Level]: The amount of helm operation required to move the rud-
der.
12. Press the key to close the rudder test window.
Rudder speed is not
appropriate. Retry test to
adjust rudder speed?
Abort
Adjust
Push MENU key to Return
Drive Unit: Safe-Helm 12V
Rudder Speed: OK
Rudder Drive Level: 11
Rudder Test