Furuno 711c Marine Instruments User Manual


 
2-1
2. STEERING MODES
This chapter describes the steering modes and functions of the NAVpilot.
2.1 STBY Mode
After turning on the power, the equipment goes to the STBY mode. This is a manual
steering mode. When sailing into or out of a harbor, steer the vessel in the STBY mode
by using the steering wheel (helm) of your boat. In the STBY mode, “STBY“ appears
on the display.
The compass rotates to keep the ship’s heading (gray pointer) at the top of the display.
2.2 AUTO Mode
The AUTO mode steers the boat automatically on a course set by the operator.
The AUTO mode will not compensate for the effects of wind or tide, which can push
you off course athwart in the ship direction. Use the AUTO mode for short, straight
voyages. Otherwise switch to the NAV mode (see section 2.3).
Heading mode
T: True
M: Magnetic
Steering mode
Ship's heading
Analog indicator
or data box
Display example: STBY mode
Ship's heading
(Gray pointer)
Tide and Wind Tide and Wind Tide and Wind