Furuno 711c Marine Instruments User Manual


 
2. STEERING MODES
2-34
2.11 OVRD mode (for IPS drive)
When the IPS drive controls the rudder, the OVRD (override) mode is automatically
enabled. The autopilot can not control the vessel in the OVRD mode.
Note: The OVRD mode is enabled for
the IPS drive equipped vessel only.
OVRD mode activation in the STBY mode
When the OVRD mode activates in the STBY mode, [OVRD] appears at the top-left
position of the display. At this time only the [Installation Menu] window and user menus
are operative. When the IPS drive releases control of the rudder, the autopilot goes to
the STBY mode.
OVRD mode activation in the AUTO or NAV mode
When the OVRD mode activates in the AUTO or NAV mode, the audio alarm sounds,
the message “EVC Override” appears, and the mode indication at the top-left position
of the display shows [OVRD]. Press any key to stop the alarm and erase the pop-up.
When the IPS drive releases control of the rudder, the autopilot goes to the STBY
mode.
359°
HDG
T
359°
T
When the IPS drive releases
control of the rudder.
359°
HDG
T
EVC Override
359°
HDG
T
359°
T
When the IPS drive releases
control of the rudder.
Press any key.