4. USER MENU
4-9
4.6 NavNet vx2 Synchronization
The NAVpilot goes to the NAV mode when it receives a P sentence (proprietary FU-
RUNO sentence) from a NavNet vx2 equipment. For example, “autopilot information”.
You can turn this feature on or off as follows:
1. In the NAV mode, long press the key to open the menu.
2. Rotate the Course control knob to select [NavNet2] then push the knob.
[NavNet2] also appears on the [NAV Option] menu.
3. Rotate the Course control knob to select [OFF] or [ON] then push the knob.
4. Press the key to close the menu.
4.7 System Setup Menu
The [System Setup] menu provides various functions which once set do not require
frequent adjustment. Set the items in this menu according to operational needs, cur-
rent environment, etc. To open this menu, open the menu and select [Other Menu] fol-
lowed by [System Setup].
[System Setup] menu description
Item Description
[Key Beep] Turn the key beep on or off.
[ON]: The key beep sounds, [OFF]: No key beep
[Arrow Key] Set the function of arrow keys when pressed to dodge an obstruction in the
AUTO and WIND modes.
[Dodge], [5°], [10°], [Manual]. For [Manual], select degree of turn from 1°-90°.
[Turn Angle] Set the angle of User turn in the turn mode.
Setting range: 15°-360°, 15° steps
[Key Lock] Activate or deactivate the key lock of the control unit.
• [Lock]: Keys are locked. When any key other than
key of the locked control unit is pressed the mes-
sage shown below appears. Also, the lock icon ( )
appears when [Lock] is selected.
To unlock, press the key while holding down the
key. If the locked the control unit is powered off, the next time the con-
trol unit is powered, the keys of the control unit are locked.
• [UNLOCK]: Keys are not locked.
[Panel Dimmer] Set the backlighting level for the panel dimmer (setting range: 1-8).
[Password] Assign a four-digit password to use to unlock the keys and menu on the control
unit (setting range: 0000-9999).
System Setup
Key Beep: OFF
Arrow Key: Dodge
Turn Angle: 15°
Key Lock: Unlock
Panel Dimmer: 8
This controller
is locked.
To unlock,
Hold MENU key down
and push > key.