Filter
Top Products
SAFETY INSTRUCTIONS
iii
WARNING
To avoid electrical shock, do not
remove cover. No user-serviceable
parts inside.
CAUTION
CAUTION
Confirm that the power supply voltage
is compatible with the voltage rating
of the equipment.
Connection to the wrong power supply
can cause fire or damage the equipment.
Observe the following compass safe
distances to prevent interference to a
magnetic compass:
Separate the reversible pump at least one
meter from communications equipment,
communications antenna and communi-
cations cabling to prevent interference.
In case of power failure, turn off the
autopilot or manually steer the vessel.
Leaving the equipment in the AUTO or
NAV mode during power failure will
cause wear on the rudder mechanism
About the TCT LCD
The TFT LCD is constructed using the latest LCD techniques, and displays
99.99% of its pixels. The remaining 0.01% of the pixels may drop out or blink,
however this is not an indication of malfunction.
Standard Steering
compass compass
0.50 m
0.35 m
0.45 m
0.30 m
0.35 m
0.30 m
0.30 m
0.30 m
Remote Controllers
(Option)
Processor Unit
FAP-7002
Control
Unit
FAP-7011C
FAP-7001
䋨Option䋩
WARNING LABEL
A warning label is attached to the processor unit.
Do not remove the label. If the label is missing or
damaged, contact your dealer about replacement.
Name: Warning Label (1)
Type: 86-003-1011
Code No.: 100-236-231