Filter
Top Products
7. INITIAL SETTINGS
7-39
7.11.3 Speed calculation
Speed is normally entered automatically, from your navigator. If the navigator fails,
manually enter speed.
1. Rotate the Course control knob to select the current setting for [Speed Calcula-
tion] from the [Parameter Setup] menu then push the knob.
2. Rotate the Course control knob to select [Auto] or [Manual] then push the knob.
3. For [Manual], do as follows:
1) Rotate the Course control knob to select the current setting value then push
the knob.
2) Rotate the Course control knob to set a value then push the knob (setting
range: 0.1 - 99.0).
7.12 AUTO Option Menu
The various features for the AUTO mode are set up from the [AUTO Option] menu. To
open the [AUTO Option] menu, select [AUTO Option] from the [Installation Menu] win-
dow.
Item Description Settings
[Advanced AUTO]
The AUTO mode will maintain a set course, but your ves-
sel’s course may be shifted by the effects of tide and
wind. To compensate for the effects of tide and wind, set
[Advanced AUTO] to [ON]. Your NAVpilot must be con-
nected to a GPS navigator which outputs position data
(Latitude and Longitude) in CAN bus or NMEA0183 for-
mat.862
[OFF], [ON]
[Net Towing AUTO]
When a bart is towing fishing gear its stern is “dragged“
by the net. This causes the boat to stray from its intended
course. To keep the boat on course, your need to adjust
the trim manually, which can be bothersome. If you do
not want to be bothered with trim adjustments, your can
enable the automatic towing function to have the trim au-
tomatically adjusted. This feature is useful for trawlers
and purse seiners. This feature is not available for a sail-
boat or Fantum Feedback
TM
.
[OFF], [ON]
[Cse After Remote]
Select the course to follow after a remote controller is op-
erated. [Cse After Remote] is not shown in case of Fan-
tum Feedback
TM
.
[Previous Course],
[Present Course]
Other than Fantum Feedback
TM
*: Not shown with a sailboat.
Advanced Auto: ON
Net Towing AUTO*: OFF
Cse After Remote: Present Course
AUTO Option
Advanced Auto: ON
AUTO Option
For Fantum Feedback
TM