Filter
Top Products
56 BBV28581 05/2010
Configuration Mode - Complete menu (FULL)
Code
Name/Description Adjustment range Factory setting
I_O-
Input Output menu (continued)
AO1-
AO1 configuration menu
AO1
M AO1 assignment
nO
nO
OCr
OFr
OrP
OPS
OPF
OPE
OPr
tHr
tHd
This parameter is used to set the value of an analog output.
v Not assigned
v Motor current, between 0 and 2 In (In = rated drive current indicated on the drive nameplate)
v Output frequency, from 0 to Max frequency tFr
v Ramp output, from 0 to Max frequency tFr
v PID reference, between 0 and 100% of the PID set point - Visible only if PID feedback assignment PIF
page 72
is not set to nO
v PID feedback, between 0 and 100% of the PID feedback - Visible only if PID feedback assignment PIF
page 72
is not set to nO
v PID error, between - 5 % and + 5 % of the PID feedback - Visible only if PID feedback assignment PIF
page 72
is not set to nO
v Output power, between 0 and 2.5 times Rated motor power nPr
v Motor thermal state, between 0 and 200% of the rated thermal state
v Drive thermal state, between 0 and 200% of the rated thermal state
AO1t
M AO1 type
0A
10U
OA
4A
This parameter provides the interface between the drive internal value and an analog output signal.
v Voltage: 0-10 Vdc
v Current: 0-20 mA
v Current: 4-20 mA
I-O-
drC-
CtL-
FUN-
FLt-
COM-