Filter
Top Products
Multimeter Command Reference 77Chapter 3
:LIMit:LOWer
CALCulate:LIMit:LOWer <value>|MIN|MAX sets the lower limit for limit testing.
You can set the value to any number between 0 and
±
120% of the highest range, for
the present function.
MIN = –120% of the highest range. MAX = 120% of the highest
range. You must turn on the math operation e.g., execute CALC:STAT ON before
writing to the math register. The lower limit is stored in volatile memory.
Example Set the Lower Limit
CALC:STAT ON
Turn on the math operation.
CALC:LIM:LOW 1000
Set the lower limit.
CALC:FUNC LIM
Select the LIMit math operation. You can select
the calculate function at any time before or
after enabling the calculate state.
:LIMit:LOWer?
CALCulate:LIMit:LOWer? [MIN|MAX] queries the lower limit.
Example Query the Lower Limit Set for the LIMit Math Operation
CALC:LIM:LOW?
Query the lower limit.
:LIMit:UPPer
CALCulate:LIMit:UPPer <value>|MIN|MAX sets the upper limit for limit testing.
You can set the value to any number between 0 and
±
120% of the highest range, for
the present function.
MIN = –120% of the highest range. MAX = 120% of the highest
range. You must turn on the math operation e.g., execute CALC:STAT ON before
writing to the math register. The upper limit is stored in volatile memory.
Example Set the Upper Limit
CALC:STAT ON
Turn on the math operation.
CALC:LIM:UPP 3000
Set the upper limit.
CALC:FUNC LIM
Select the LIMit math operation. You can select
the calculate function at any time before or
after enabling the calculate state.
:LIMit:UPPer?
CALCulate:LIMit:UPPer? [MIN|MAX] queries the upper limit.
Example Query the Upper Limit Set for the LIMit Math Operation
CALC:LIM:UPP?
Queries the upper limit.