Filter
Top Products
96 Multimeter Command Reference Chapter 3
CONFigure?
The CONFigure? command queries the multimeter to return the configuration set by
the most recent
CONFigure or MEASure command.
It returns a quoted string to the output buffer in the following format:
“<function
> <
parameter
>,<
parameter
>”
Subsystem Syntax CONFigure?
Comments • When the multimeter is configured for current, voltage or resistance
measurements,
CONFigure? returns the function followed by the selected
range and resolution. For example:
“CURR:AC +1.000000E+00,1.000000E-05”
“CURR +1.000000E+00,1.000000E-05”
“VOLT:AC +2.000000E+02,1.000000E-06”
“VOLT +3.000000E+02,1.000000E-06”
“FRES +100.0000E+03,1.000000E-05”
“RES +1.000000E+03,1.000000E-03”
“FREQ +3.000000+00,3.000000E-05”
“PER +3.333330E-01,3.333330E-06”
• If you specify DEF, MIN, or MAX for the range or resolution parameters in
CONFigure or MEASure, the CONFigure? command returns the selected
value.
• Related Commands: CONFigure, MEASure
Example Querying the Multimeter Configuration
dimension string array
Dimension computer array to store string.
CONF:FRES 900,MAX
Function: 4-wire ohms; range selected: 1k
Ω
;
MAX resolution: 100m
Ω
.
CONF?
Query configuration.
enter statement
Enter string into computer.
String Returned:
“FRES +1.000000E+003,9.999999E-02”