Filter
Top Products
86 Multimeter Command Reference Chapter 3
or resolution different from the default value prior to executing the CONFigure
command. The following table lists the default settings you can expect from the
CONFigure command for each function.
Default Settings for
CONFigure Command by Function
FUNCTION RANGE RESOLUTION
CURR[:DC] 1A 1µA
CURR:AC 1A 10µA
FREQ FREQ:RANG = 3Hz
VOLT:RANG = 10V
30µHz
FRES 1kΩ 1mΩ
PER PER:RANG = 0.333sec
VOLT:RANG = 10V
3.33µseconds
RES 1kΩ 1mΩ
VOLT[:DC] 10V 10µV
VOLT[:DC]:RAT 10V 10µV
VOLT:AC 10V 100µV