Filter
Top Products
Known Galileos List:
The main body of the Galileos page is dedicated to a list of known Galileo units.
Remove
Removes a disconnected Galileo from the list.
Order
Moves the associated Galileo up or down the list.
Link
Selects a Galileo for inclusion in global Galileo linking. Linked units are also indicated by
a colored bar above their tab.
See Global Galileo Select-Linking Mode (p. 78) for configuration details regarding the
behavior of globally linked Galileos.
ID
Selects the global link group for the Galileo. Up to eight global groups may be defined.
IP Address/Galileo Nickname/Tab Name/Ver./Status
Shows information about the Galileo unit.
Connection
Select Refresh to determine whether Compass can connect to the Galileo unit.
Select Connect to connect to the Galileo.
Select Disconnect to disconnect the Galileo from Compass.
Virtual
Select Use Virtual to simulate connection to the Galileo using Virtual Galileo. Select this
when you wish to work on a project without having a working physical connection to a real
Galileo 616. Settings on a connected Virtual Galileo can always be transferred to a physical
Galileo using the Snapshot/Project window.
Meters
Select Demo prior to connecting a Galileo to show a meter simulation on various UI meters.
Tab
Select Hide to hide a disconnected Galileo from the tabs list at the top of the window.
92
CHAPTER 4: USER INTERFACE REFERENCE