Filter
Top Products
Assigning M Series Array Correction to an Output Channel
To apply an M-Series array correction output:
1. Select:
■
[Galileo Unit] > Galileo Map. In the Array Corr. column, click the button that
corresponds to the channel that will be sent to the line array. The Settings > Array
Correction page will be displayed.
■
[Galileo Unit] > Settings > Array Correction.
2. For each output channel that is being sent to a line array, select its entry on the line
corresponding to the type of Array EQ it requires. Each output channel may be assigned
one array correction EQ.
Configuring MSL-4 Loudspeaker Array Correction
The Meyer Sound MSL-4 is a horn-loaded long-throw speaker that can be configured for use
in horizontal array clusters. When so configured, a low-mid frequency rise occurs. Compass
provides a TruShaping equalization setting to correct this low-frequency emphasis.
1.
Select the [Galileo Unit] > Output Processing > TruShaping page.
2.
Right-click TruShaping tab. Click the TruShaping EQ Load button. A file selector window
will be displayed.
3.
Navigate to the Compass/Saved Settings/Examples directory and load
Set TruShaping to LD-2 Array.galileoTruShapingEq.
The TruShaping equalization curve will now be set to provide low-mid frequency correction to
the rise that is created by using the MSL-4 in a horizontal array.
Connecting and Configuring for use with SIM3
The Galileo 616 can be configured to act as a line switcher for the Meyer Sound SIM-3022
Audio Analyzer, allowing the SIM3 to measure across all combinations of inputs and outputs
without need for further patching, further increasing your efficiency and design capabilities.
51
COMPASS USER GUIDE