Filter
Top Products
Select Show to restore the Galileo tab at the top of the window.
Global Atmospheric Correction Control:
Configures atmospheric correction for all Galileos.
IMPORTANT: Adjusting the global atmospheric settings resets the individual Galileo
atmospheric correction values. You must disconnect those Galileos that are not to be
changed.
Temperature
Sets the facility temperature.
Humidity
Sets the facility humidity.
Altitude
Sets the facility altitude.
Named Galileo Tabs
Each Galileo is listed on its own page, selected using its tab at the top of the Compass window.
A set of tabbed sub-pages classifies various sets of controls, as listed below; some of these
pages have sub-pages of their own, due to the many controls available for your use.
Status Bar
At the bottom of all named Galileo pages is a status bar with snapshot and project controls,
and channel select, isolate, and link group controls, as well as some status indicators.
NOTE: These controls affect only the active Galileo. These controls do not affect global
snapshots, projects, or link group assignments.
93
COMPASS USER GUIDE