Filter
Top Products
Save
Saves the current project, using the existing project name.
Save As...
Displays a file selection window, through which you can select a directory and file name
for the project.
Close
Closes the current project. This will prevent changes from being accidentally written to the
project.
Boot Snapshot:
Name
Shows the name of the boot snapshot, which will be recalled when the Galileo is first
powered-on. This can be used to provide a “default mode” of safe system settings and
control values appropriate for recovery from a site power failure, or to provide appropriate
control values for the first few minutes of beginning preparations for a show.
Recall
Recalls the boot snapshot, setting the Galileo’s controls as if power-on had just occurred.
Select
Selects the boot snapshot in the Snapshot Library list (described below). This is a
convenience shortcut, so that you do not have to scroll through the list looking for the
snapshot.
To make a snapshot the boot snapshot, use the Is Boot selector in the Snapshot Library.
Clear ‘Is Boot’
Removes the boot snapshot indicator from the snapshot. As a result, the configuration
settings and control values the Galileo had when powered-off will be restored when power
is restored (instead of using the settings and control values captured in a boot snapshot.)
Snapshot Library:
ID, Name, Comment
Shows information about the selected snapshot.
99
COMPASS USER GUIDE