Filter
Top Products
2.
Clear Enable Linking Across Selected Galileos to avoid configuring other Galileos.
3.
Select the appropriate Output Voltage Range for the connected devices.
Configuring Many Galileos Simultaneously
When you have several Galileo 616 units with identical I/O requirements, you can configure
them simultaneously.
1.
On the Galileos page:
a.
In the Link column, select the Galileos that will be configured identically.
b.
In the ID column, assign the selected Galileos the same link ID.
2.
Select a [Linked Galileo Unit] > Settings > Input and Output page.
3.
Select Enable Linking Across Selected Galileos. The page background color will change
to dark purple (magenta).
4. Configure the Galileos as described in the previous procedures.
All globally linked Galileos will now have the same I/O configuration.
Using the Summing Matrix
The Summing Matrix is analogous to the matrix component of a standard physical mixing
console, where input channel rows are directed to output channel columns. Each crosspoint
can be fine-tuned from full attenuation to +20 dB gain.
Using the Summing Matrix as a Signal Router
Signal routers do not adjust signal level as the signal is routed from inputs to outputs. Each
crossover point is a simple switch, selecting full attenuation (off) or unity gain (on).
1.
Select the [Galileo Unit] > Summing Matrix page.
2.
Select Router Mode, located at the top left of the page.
30
CHAPTER 3: USING COMPASS TOOLS