Filter
Top Products
3.
Select Enable Linking Across Selected Galileos. The window will now have a dark purple
(magenta) background color.
4.
Using the Natural Environment for Atmospheric Correction controls, set the temperature,
humidity, and altitude for the facility.
All globally linked Galileos will now be set to the same environment conditions. You should now
set the distances between the loudspeakers and listening area.
Setting Loudspeaker Distance for Multiple Channels on Multiple Galileos
The distance setting can be used to correct high frequency attenuation. For popular music
reinforcement or any application for which the system will be running near its limit, start with
half the actual distance between the loudspeaker or array, and the audience. If the result is too
flat or sounds unnatural, reduce the distance parameter to achieve the desired response.
1. Configure globally linked Galileos as described in Linking Galileos (p. 46).
2. For each of the globally linked Galileos:
a.
Enable Select and disable Isolate for each output channel that is to be set.
b.
Select the Settings > Environment page and enable Atmospheric Correction
Distance Linked.
3.
For one of the globally linked Galileos, select Enable Linking Across Selected Galileos.
The windows of the globally linked Galileos will now have a dark purple (magenta)
background color.
4.
Select the Output Processing > Channel Settings page.
5.
Using the Atmospheric Correction Distance control, set the distance between the
loudspeakers and the listening area.
All selected/non-isolated channels on the globally linked Galileos will now be set to the same
loudspeaker distance. Avoid settings of more than 40 m (130 ft) to save headroom in the very
high frequencies.
49
COMPASS USER GUIDE