Filter
Top Products
3. For each input that is to be routed to an output, click the crossover point to select unity
gain. Input signal will be routed to the output channel at unity gain.
Crossover points may still be assigned an arbitrary crossover attenuation value. Click inside
the crosspoint value box and type a new value, then press ‹Enter › to set the value.
Creating a Custom Summing Matrix
The greatest power of the matrix is its ability to route an input channel to several output channels
simultaneously at varying signal levels, combining sources and helping diminish sound
localization.
1.
Select the [Galileo Unit] > Summing Matrix page.
2.
Clear Router Mode, located at the top left of the page.
3. For each input that is to be routed to an output, assign an attenuation value to the
crosspoint. You may adjust the level of the combined signal using the Output Masters
controls, while adjusting the relative level of each input source using the Summing Matrix
controls in the output channel column.
Resetting Matrix Values
1. Right-click on a crossover point: either the crossover point you wish to reset, a crossover
point on a row you wish to reset, or on any crossover point if you want to reset the entire
matrix. The Clipboard Options and Saved Settings window will be displayed.
2.
Select the appropriate Reset. The button row labeled Matrix Gain corresponds to the
specific crossover point, Matrix Input Row to the row, and Summing Matrix to the entire
matrix.
NOTE: Channel selects and global Galileo linking can result in other matrix controls
also being reset. The Clipboard Options and Saved Settings window provides a
list of linked Galileos and channels.
31
COMPASS USER GUIDE