Filter
Top Products
training the facility operator will be able to select and recall the appropriate snapshot for the
current activity.
Using Snapshots for Tour Setup
In a traveling show, snapshots can be used to provide a base foundation from which to quickly
develop site-specific tuning. For this purpose, you might create a separate project file for each
act, and capture snapshots of various base configurations suitable for the venues you expect
to encounter. As you tune the configuration for a specific venue, you might save new snapshots,
some of which may be useful at future sites. If you are not mixing the show, you might use
Access Control (p. 68) to lock down parts of the system.
Projects
Creating a New Project
1.
Select the [Galileo Unit] > Project page.
2.
In the Current Project box, click Save As….
A file selection window will be displayed, through which you can select a directory and file
name for the project file.
Saving a Project
■
Click Save Project.
If a project has not been previously created or loaded, a file selection window will be
displayed, through which you can choose a directory and file name for the project file.
65
COMPASS USER GUIDE