Filter
Top Products
2.
Clear the Settings control, located in the top right corner. The various display setting
controls will now be hidden, allowing the plot more horizontal space.
3.
Clear the Dual View setting.
4.
Click Collapse, located to the right of the sub-page selection tabs. The control setting
controls will now be hidden, providing significantly more vertical space for the plot.
Screen-splitting the Processing Window
Large-screen users may benefit by using Dual View mode when developing EQ plots. In this
mode the entire processing control suite is duplicated in left and right halves of the Compass
window. You can use this to see two views of one channel (with access to two sets of EQ
controls simultaneously); to view a stereo pair; or to select two arbitrary channels for comparison.
1.
Enable the Dual View control, located in the top right corner.
2.
Use the Input Channel or Output Channel selectors to choose channels to be displayed
in either half of the Compass window.
Displaying Multiple EQ Plots
At the cost of reduced plot size, multiple plots may be displayed simultaneously:
1.
Enable Settings, select the Plotter page, and beside the EQ Plots label select Multiple
display.
2.
In Layout, select the size of the plot grid (w × h).
3.
In Order, choose between horizontal or vertical channel numbering layout.
4.
In First, select the first (top left) channel for the layout.
The channel plots will be laid out sequentially, starting at the top left and proceeding horizontally
or vertically, as selected. When necessary, the channel numbers will “wrap around” to channel
one,
54
CHAPTER 3: USING COMPASS TOOLS