Filter
Top Products
Plot
Shows the frequency/gain curve, control handles, phase response, and other EQ details.
Equalization plot display options are controlled through Processing Interface Settings (p. 122).
The displayed plot is often selected by choosing one of the sub-page tabs.
Processing Interface Settings
The processing pages have a complete suite of interface settings, allowing you to customize
plot displays:
Dual View
When enabled, displays a pair of channel Processing pages with subtabs.
All channel controls are duplicated.
When cleared, a single channel Processing control set is displayed.
Settings
When enabled, displays Processing user interface settings. There are a
number of user interface settings, as follows.
When cleared, Processing user interface settings are hidden, allowing more
room for the EQ plot.
Plotter
EQ Plots
Shows a single EQ plot, or up to six input or sixteen output channel EQ plots as
configured by the following settings:
Layout
Selects the grid dimensions, from 1×2 to 3×2 channels.
Order
Selects the channel display order, left-to-right or top-to-bottom.
First
Selects the first (top-left) channel on the layout grid.
Plotter Gain Range
Selects the gain (vertical) axis range of EQ plots.
122
CHAPTER 4: USER INTERFACE REFERENCE