Filter
Top Products
Updating a Snapshot
Assuming a snapshot has been previously created or recalled, it may be updated to match
current control settings. Using the controls at the bottom of any Galileo sub-page:
■
Click Update.
Recalling a Boot Snapshot at Galileo Power-on
The Galileo 616 can be configured to automatically recall a specific snapshot when first
powered-on. This is very useful for defining a “safe” or default configuration.
1.
Select the [Galileo Unit] > Project page.
2.
From the Snapshot Library, select the desired snapshot.
3.
In the Snapshot Library box, enable Is Boot.
The Boot Snapshot control will be updated with the snapshot name. The next time the Galileo
unit is powered-on, that snapshot will be automatically recalled.
Galileos that have been assigned a boot snapshot are indicated by the presence of a blue Boot
Snapshot Enabled box at the bottom center of their control pages.
Locking a Snapshot
When you have perfected a snapshot, you may want to ensure it is not accidentally modified.
1.
Select the [Galileo Unit] > Project page.
2.
From the Snapshot Library, select the desired snapshot.
3.
In the button row below the library list, click Lock.
If the need arises, click Unlock to allow updates to the snapshot. If a snapshot with the same
name already exists, a count number will be appended to the name of the loaded snapshot’s
name.
63
COMPASS USER GUIDE