Filter
Top Products
Chapter 6 Managing the File System
Working With File Systems
StorNext User’s Guide 92
2. Modify the file system’s global settings.
3. Add disks to the file system.
4. Add stripe groups for the file system.
5. Make the file system.
6. Start the new file system.
7. Mount the new file system.
8. Add affinities to the new file system.
Each of the above steps is explained in the following procedure.
1 From the SNFS home page, choose File System from the Config
menu. The Configure File System screen appears.
Figure 56 Configure File
System Screen
2 Click Add to continue. The Add File System screen appears.
3 Type a name and mount point for the new file system and click OK.
A status screen appears.
4 When the status screen indicates that the file system has been added,
click Close.
5 Configure global settings for the file system as explained in Making
Global Changes on page 100.