Filter
Top Products
Chapter 4 Common StorNext Tasks
Starting and Stopping StorNext Components
StorNext User’s Guide 54
2 Change the user’s password or modify permissions as described in
Adding a New User
, and then click OK.
3 Click Close when the Status screen displays Success.
Deleting an Existing User4
Use this procedure to delete an existing StorNext user.
1 From the User Access Control screen, select a name from the User
List and click Delete.
2 When asked to confirm that you want to delete the user, click OK to
proceed or Cancel to abort.
3 If you click OK, click Close when the Status screen displays Success.
Starting and Stopping StorNext Components
There are two ways to start or stop the StorNext applications, SNFS and
SNSM:
• By using the Admin menu’s Start/Stop StorNext option
• By clicking the Server Status button located at the lower right corner
of the StorNext home page
The following procedure describes how to start/stop StorNext
components using either of these methods.
1 From the StorNext Home Page select Start/Stop StorNext from the
Admin menu. Alternatively, click the Server Status button in the
lower right corner of the screen. (This button displays the server’s
current status, such as Active.) The Start/Stop StorNext screen
appears.
Note: If there is only one administrator, you can modify only the
password. A sole administrator has full access
permissions, and you cannot modify these permissions.
Note: If there is only one administrator, you will not be allowed
to delete the administrator.