Filter
Top Products
Chapter 9 Managing Media
Using the SNSM Media Functions
StorNext User’s Guide 228
4 On the Media Browser screen, select from the Select Media list the
media you plan to move manually. If desired, you can reduce the
number of entries in the media list by entering a filter in the Media
Filter field. This field accepts the wildcard character (asterisk *). You
can also select all media by clicking the Select All button.
5 Click OK after you are finished selecting media.
6 Select from the Destination Archive dropdown list the destination
library to which you plan to manually move the media you just
selected.
7 When you are ready to flag the selected media for moving manually,
click Apply.
8 When the Status screen informs you that the media have been
successfully flagged for moving manually, click Close.
9 Complete the process by manually removing the media from the
source library.
10 Access the Library Operator Interface from the StorNext home page
by choosing Library Operator Interface from the Admin menu. To
enter media into the destination library, select the destination library
and then click Enter Media.
Mounting and
Dismounting Media 9
Use the procedures in this section to mount and dismount media in a tape
drive as needed.
Mounting Media
9
Use the following procedure to mount media.
1 From the SNSM home page, choose Library > Mount from the Media
menu. The Mount Media screen appears.