Filter
Top Products
Chapter 6 Managing the File System
Checking the File System
StorNext User’s Guide 149
Figure 95 Check File System
Screen
2 Select from the File Systems list the file system you want to check.
Only file systems eligible for File System Expansion or Stripe Group
Movement are shown in the list. Next to the file system name, the file
system’s current state is shown in parentheses: mounted or
unmounted, and started or stopped.
3 If desired, select the Check Read Only option if you want to perform
the file system check in read-only mode.
4 When you are ready to proceed with the check on the selected file
system, click Apply. The status window informs you that the process
was initiated. Close this window by clicking Close.
Checks in progress are shown as In Progress under the heading
Current Status of Check File System. If the move does not appear
with an In Progress status, click Refresh to update the list.)
5 Also listed under Current Status of Check File System are any
previously run file system checks. To clear the list of previously
completed checks (marked Success or Failure,) click Clear.
Note: If the file system you select is currently started and
mounted, the check will be automatically performed in
read-only mode. In read-only mode on a live file system
(started and mounted,) you could receive false errors.