Filter
Top Products
Using the Dynamic Resource Allocation Feature
StorNext User’s Guide 371
The proxy who
Command 3
Use the proxy who command to display the active disk distributed LAN
connections for the specified host, which can be either a disk distributed
LAN server or client. Output also includes average I/O statistics for each
connection. The syntax for this command is proxy who hostname.
Command usage and output looks similar to this (both distributed LAN
client and distributed LAN server output is shown):
snadmin (yy) > proxy who y
FS 'yy'
Disk Proxy Client connection from 172.16.82.62
Remote address 172.16.82.62 port 1052 flags 0x2
Read 1.2 Mbytes/s, write 0.0 bytes/s
snadmin (yy) > proxy who fie
FS 'yy'
Disk Proxy Server connection to 172.16.82.130
Remote address 172.16.82.130 port 1036 flags 0x1
Read 0.0 bytes/s, write 1.2 bytes/s
Using the Dynamic Resource Allocation Feature
Quantum recommends that you perform dynamic resource allocation
using the StorNext GUI. However, if your operating system does not
support using the GUI for this feature (or if you are operating in a failover
environment,) you can accomplish the following tasks from the
command line:
• Adding a Stripe Group Without Moving
• Adding and Moving a Data Stripe Group
• Moving a Metadata/Journal Stripe Group