Filter
Top Products
Adding a File System Client
StorNext User’s Guide 361
16 Restart the file system. Type:
/usr/cvfs/bin/cvadmin
snadmin> start <file_system_name>
snadmin> activate <file_system_name>
snadmin> select <file_system_name>
snadmin> show
snadmin> who
snadmin> quit
17 Mount the system by typing the following:
mount -t cvfs <file_system_name> <mount_point>
For example: mount -t cvfs snfs1 /stornext/snfs1
Adding a File System Client
Use this procedure to add a file system client using the CLI.
1 Install StorNext as described in the StorNext Installation Guide. Follow
the instructions that pertain to your operating system.
2 Copy the example fsnameservers file to the config directory by
typing:
cp /usr/cvfs/examples/fsnameservers.example /usr/cvfs/config/
fsnameservers
3 Edit the /etc/fstab file to mount on boot (for Solaris, edit the /etc/
vfstab file).
4 Reboot the machine.
5 Verify that the system has mounted by typing the following:
df -k
If your machine did not mount on boot, refer to “Resolving
Installation Problems” in the StorNext Installation Guide.
Caution: The fsnameservers file must be the same on all
machines.