Filter
Top Products
Chapter 10 Managing Storage Disks
Modifying a Storage Disk
StorNext User’s Guide 245
Modifying a Storage Disk
Use this procedure to modify a previously configured storage disk.
1 From the SNSM home page, choose Storage Disk > Config from the
Admin menu. The Configure Storage Disk screen (figure 178
on
page 241) appears.
2 Select a storage disk from the Current Storage Disks list, and then
click Modify. The Modify Storage Disk screen appears.
Figure 182 Modify Storage
Disk Screen
3 Modify any of the following information:
Note: For a blank storage disks (i.e., a storage disk that has not
been written to, and one where no file system files reside,)
you can modify any of the parameters on the Modify
Storage Disk screen. If the storage disk has been written
to, you can change only the number of streams.