Quantum 3.5.2 Marine Sanitation System User Manual


 
Chapter 7 Managing Libraries
Adding a Library
StorNext User’s Guide 170
Adding a Library
Use the procedure in this section to add libraries to StorNext. StorNext’s
Storage Manager (SNSM) component supports three library types:
SCSI: A SCSI or fibre channel-attached library.
Network (ACSLS or DAS): A network-attached library. There are
two types of network-attached library: ACSLS or DAS.
Vault: A library that stores media moved from a robotic library. A
vault library is used to only store media, and cannot be reconfigured
after it has been designated as a vault.
When adding a library to StorNext, follow the instructions specific to
your library type.
Starting the Add Library
Wizard 7
Use this procedure to launch the Add Library wizard.
1 From the StorNext home page, choose Add Library from the Config
menu. The Library Introduction screen appears, showing all
currently configured libraries.