Filter
Top Products
Chapter 4 Common StorNext Tasks
Setting up Alternate Retrieval Locations
StorNext User’s Guide 74
Setting up this feature consists of the following steps:
• Enter the IP address of the alternate machine you want to use for
retrieval. (This alternate machine may or may not contain StorNext.
StorNext is not required on an alternate machine.)
• Enable the feature for the file system(s) desired
• Specify the path on the remote machine for the file system to access
1 From the SNSM home page, choose Alternate Retrieval Location
from the Admin menu. The Alternate Retrieval Location screen
appears.
Figure 44 Alternate Retrieval
Location Screen
2 At the Remote Node IP field, enter the IP address or host name of the
remote machine from which you want to retrieve truncated files in
the event that normal retrieval fails.
3 Select the Enable field to enable the feature for the file system.
4 Locate the managed file system you want to use, and enter at the
Remote Path field the pathname on the remote machine for the file
system.
5 Click Apply to continue.
6 When the Status screen informs you that the feature has been
successfully enabled, click OK. The feature is now enabled for the file
system(s) you specified.