Filter
Top Products
Equipment Conventions 11
Equipment
Conventions
In this guide the term “Edge device” refers to any of the following:
SuperStack II Switch 2700, 7200/7400 ATM/Ethernet Interface Card,
7600 Fast Ethernet Interface Card, Super Stack II Switch
1000/3000,NetBuilder II, CoreBuilder 4000,Super Stack II Switch 2000,
CoreBuilder 2500/6000 and CoreBuilder 5000 Switch Module and the
term “ATM Switch” refers to the CoreBuilder 7000 ATM Switch.
Commands The word “command” means you must enter the command
exactly as shown in text and press the Return or Enter key.
Example:
To remove the IP address, enter the following command:
SETDefault!0 -IP NETaddr = 0.0.0.0
Note: This guide always gives the full form of a command in
uppercase and lowercase letters. However, you can
abbreviate commands by entering only the uppercase letters
and the appropriate value. Commands are not case-sensitive.
Screen displays This typeface represents information as it appears on the
screen.
The words “enter”
and “type”
When you see the word “enter” in this guide, you must type
something, and then press the Return or Enter key. Do not
press the Return or Enter key when an instruction simply says
“type.”
[Key] names Key names appear in text in one of two ways:
■ Referred to by their labels, such as “the Return key” or
“the Escape key”
■ Written with brackets, such as [Return] or [Esc].
If you must press two or more keys simultaneously, the key
names are linked with a plus sign (+). Example:
Press [Ctrl]+[Alt]+[Del].
Menu commands
and buttons
Menu commands or button names appear in italics. Example:
From the Help menu, select Contents
Words in italicized
type
Italics emphasize a point or denote new terms at the place
where they are defined in the text.
(continued)
Words in bold-face
type
Bold text denotes key features.
Table 3 Text Conventions (continued)
Convention Description