Filter
Top Products
2-6 CHAPTER 2: CONFIGURING AND LAUNCHING THE ATM AND VLAN MANAGER
An Example of Distributed Polling.
Figure 2-2 A Listing of Contents from the
C:\TranscendNT\ATMvLAN\runtime\cnf\mediationd.cnf
Line one displays the range of IP addresses (IP address 100.200.100) with
their last address field, address ending in numbers between 170 through
180, polled to IP address 100.200.100.78, poller number1.
A hyphen should be used to indicate a range.
Line two displays all other IP addresses in subnet 100.200.100.*, are
polled to IP address 100.200.100.79, poller number 2.
A * should be used to indicate a wildcard.
Line three displays that all other IP address in subnet,100.*.*.*, are polled
to IP address 100.200.100.77, poller number 3.
Line four displays that all other address in the network are polled to
127.0.0.1, poller number 4 which represents the poller located on the
local machine.
Be certain that the last entry in the mediationd.cnf file contains a global
subnet (*.*.*.*) in the first field to ensure that all nodes in the network
are assigned to a poller.
100.200.100.170-180:100.200.100.78:1161
100.200.100.*:100.200.100.79:1161
100.*.*.*:100.200.100.77:1161
*.*.*.*:127.0.0.1:1161