Filter
Top Products
3-16 CHAPTER 3: USING THE ATM AND VLAN MANAGEMENT APPLICATION
You can perform all the ATM and VLAN Management applications tasks
using the Transcend Topology Browser. The other ATM and VLAN tools
are used for display purposes and database modifications. You can also
view the status of traffic and other network parameters using some of
the tools.
To invoke one of the tools, double click on the icon. See Section 2 for a
description on how to use these tools to perform network management
tasks.
Using the ATM and
VLAN Assistants
There are four types of assistants: configuration, graph, path and
performance. You can use these assistants to setup parameters trace
paths, and see the performance of your devices on the network.
Configuration
Assistants
The following section describes the ATM and VLAN configuration
assistants.
Backbone and Services Configuration Assistant
To launch the Backbone and Services Configuration Assistant:
1 Select the Backbone and Services icon from the LAN Emulation Map
2 Select Configuration Assistant from the ATMvLAN menu.
To set up the LECS database:
1 Synchronize the LECS databases. See “LECS Database Creation and
Synchronization” on page 4-8.
2 Setup the LES/BUS redundancy and activate it. See “Description of
LES/BUS Redundancy” on page 4-10.
Manual Device Discovery Configuration Assistant
The Manual Device Discovery Configuration Assistant is used to manually
enter devices into the managed devices list.
To launch the Manual Discovery Assistant:
1 From the Root window select the “ATMvLAN Devices” icon.
2 Select Configuration Assistant from the ATMvLAN menu. See “Using the
Manual Device Discovery Assistant” on page 4-2.