Filter
Top Products
5-4 CHAPTER 5: NETWORK MODIFICATION TASKS
The VN-vLAN_name window appears as in Figure 5-2, with the Ethernet
segments associated with the selected VLAN displayed.
Figure 5-2 The VN_name window
3 Reposition the VN-vLAN_name window so that it is separate from the
Virtual LANs window.
4 In the VN-vLAN_name window, identify the Ethernet segment icons to be
moved by their IP addresses and port numbers.
The IP Address with the addition of the number of the port to which the
segment is connected identifies the Ethernet segment. The last number in
the segments icon label indicates the port number. For example, the
following icon label indicates that Ethernet segment 100.0.0.0 is
connected to port 6.
Seg.100.0.0.90.6
5 Select the Ethernet segment icons to be moved.
In the HPOV platform, use CTRL/MB1 for multiple selections. You may
also select a rectangle over an area to enclose multiple Ethernet segment
icons using the drag/MB1 feature.